Nov 09, 2015 CNC Simulator Pro 7 Full Version Including Crack & Serial/License Key for Free Download Link: CNC Simulator is a comprehensive utility. CNC Simulator Pro Free Download Latest Version Setup. It is easy yet Full versatile and contemporary 3D CNC. Nanjing Swansoft CNC Simulator is also capable for simulation the real time tools such as coolant, operating mode, measuring tools and many more. Quickbooks Crack + Keygen Download Final Release Here. Quickbooks Crack is smarter tools for the world hardest workers.The interface of Quickbooks is very friendly and easy to understand.
Cnc Simulator Pro 3.2 Crack
The purpose of this tutorial is to learn the basic concepts of how to use CNCSimulator Pro. We are going to make a very simple part where we mill a slot and drills four holes in a 100 x 100 x 20-millimeter workpiece. For simplicity, we are going to ignore radius compensation and work only in absolute coordinates.
This is the part we are going to make:
First of all, we need to set millimeters as units and load an appropriate machine for our project.
From the main menu, select Settings and click on Settings.
Ensure that you have millimeters selected as this tutorial is made in millimeters.
Click OK to close the settings dialog.
Click File – Load Machine from the main menu or click the open machine button
Double-click on the Milling folder.
In the dialog that shows, please deselect “Load demo”. Then select the “Milling Center” machine and click Open.
Fine, now let’s get started by defining our workpiece. Press F2 on the keyboard to open the Inventory Browser.
Click on the “Mill Workpieces” tab at the top of the dialog.
Click on the green plus button to add a new workpiece.
In the “Workpiece Name” field, enter a name for your new workpiece, let’s call it “Tutorial1”.
Enter X, Y, and Z size as 100, 100, and 20.
Take note of the workpiece index number. Here we did not have any workpieces before in the registry, hence the index number became 1. In your case, the number could be different. See the red arrow.
Ignore the rest of the settings and click OK to close the Inventory Browser.
Now we need to call up our new workpiece from the program. We do that by using the command $AddRegPart followed by the workpiece index number (we use 1) and the table displacement values.
We are going to put our new workpiece 30 millimeters from the machine zero in both X and Y. The machine zero is placed near the lower-left corner of the machine table and it is marked by a cross symbol (it can be somewhat hard to spot).
To call up our workpiece number one (or your index number if different) on X30 Y30 from the machine zero, we write $AddRegPart 1 30 30
Now you can go ahead and click on the Play button (simulation start) to see that your workpiece shows up on the table.
In the lower toolbar, click this button to zoom in on the machine table.
At this moment, please note that you can click in the simulation window with the left mouse button and drag the mouse around to rotate the view. If you click with the right mouse button and drag, you will pan the view. Also, please note that you can roll the mouse wheel to zoom in and out.
Ok, let’s get started with the actual CNC program!
As we moved the workpiece in on the machine table and away from the machine zero, our lower-left corner on the workpiece now is at X30 Y30. That is not very practical, so let’s move the programming zero point to X30 Y30 Z20. This will result in a zero point in the upper (Z) lower-left corner (XY) of the workpiece.
We move the programming zero point by using the G-code G92. (This can also be done from a zero point registry using G54 to G59, but that is out of the scope of this tutorial).
Type G92 X30 Y30 Z20 in the editor.
Click on the Play button again and note how the zero point moves to the corner of your workpiece.
Now, we need tools to mill the 10 mm wide slot and drill the 10 mm diameter holes.
Again, press F2 on the keyboard to open the Inventory Browser (or select Settings – Inventory Browser from the main menu).
In this tutorial, we assume you have no previous custom made tools, if you do, please add these two new tools at the end of your list and use the tool index you get.
Select “My milling tools” and click on the button with the green plus icon, the Add button.
First, we will add the tool to mill the slot. Select a flat tooltip, enter 10 as diameter, and 50 as length. Enter the name of the tool “Tutorial1 flat mill”. Ignore all other settings and click OK.
In our case, this new tool will get tool index number 1 (take note of yours).
Now, we repeat the procedure adding the drilling tool. Click the Add button again.
This time, select a pointed tooltip and enter diameter 10, length 50, and tip angle 80 degrees. Name it “Tutorial1 drill”. Click OK.
Click on the X in the upper right corner of the Tool Browser to close it.
Congratulations! Now we have a workpiece and tools and can start programming the rest of our part.
To call up our new milling tool we use T1 (or your tool index number) followed by M6 to tell the virtual machine to go to its tool change position and execute the tool change.
T1 M6
Next, let us move the tool to the start position. We have decided to use the lower-left corner of the slot as the start where we will drill down into the material.
We use G-code G0 to move with rapid speed to the position stopping 2 mm over the workpiece.
G0 X15 Y15 Z2
Now, press Play to see that the positioning works.
Enter the G-code G1 for the feed movement down to working depth. We also need to start the spindle (M3) and set the Feed rate (F) and spindle RPM (S).
G1 Z-5 F250 S2000 M3
Now we will move the mill to the start point of the arc, there is no need to type G1 in this block as the code is modal, meaning it will remember the G1 code from the previous block (“block” = line).
Y70
From now on, feel free to click the Play button at any time to check the simulation.
Let’s program the clockwise arc movement. To do so, we use the G2 code followed by the X/Y coordinates of the endpoint and the I/J coordinates of the relative center point (I stands for incremental distance from starting point to center in X and J is the same in Y).
G2 X30 Y85 I15 J0
Great! Let’s enter the rest of the blocks to finish the slot.
G1 X85
Y15
X15
How about that? We are back to where we started. Let’s go up in Z to a safe position and then change the tool for the drillings.
G0 Z2
T2 M6
Make sure you use your tool index after T for the drilling tool we created.
Cnc Simulator Pro Crack Apk
Now we can come back from tool change position and put the drill over the first hole.
G0 X30 Y30 Z2
Next, we will start a drill cycle. We only need to start it and then it will drill on each position we program until we tell it to stop. For this, we use a common drill G-code called G81. We tell the cycle to drill to a total depth of 15 mm and a start depth of 1 mm above the workpiece. As we have changed the tool, we need to start the spindle again (M3). This time, let us also use coolant water (M8) to not overheat the tool.
G81 Z-15 R1 M3 M8
Now we can just position over each hole center and the drilling will start automatically.
Y70
X70
Y30
Now we need to end the drilling cycle using the G80 code.
G80
Finally, we go up in Z and write M30 to end the program.
Z50
M30
Congratulations! You have done your first CNC program in the famous CNCSimulator Pro software!
The complete program:
$AddRegPart 1, 30, 30
G92X30 Y30 Z20
T1 M6
G0 X15 Y15 Z2
G1 Z-5 F250 S2000 M3
Y70
G2 X30 Y85 I15 J0
G1 X85
Y15
X15
G0 Z2
T2 M6
G0 X30 Y30 Z2
G81 Z-15 R1 M3 M8
Y70
X70
Y30
G80
Z50
M30
CNC Simulator
CNC Simulator Pro 2020 Crack is utility software that enables you for simulating the CNC (Computer Numerical Control) machine. This application is specially developed to assist the machinists in the process of learning about g-code writing or CNC programming. You can check your instructions, coding or commands. Either it is true or false you have coded. CNC Simulator Pro has a very featured intuitive interface. The interface of the application has two separate planes. The first plane is for writing the g-code. The second is for previewing the result of your programming.
There is the 2D simulation in the CNC Simulator Pro 2019 License Key enabling the users for viewing the path. You can easily convert the 2D simulation into the 3D simulation. You can make the 2D simulation as well as the 3D simulation using this application. The currently active command on which you are work is highlighted. The CNC Simulator Pro 2019 Crack may help you to find the error that is occurred in your work. These errors were shown on the other part of the interface. By reading the error, you can easily be debugging the error and show the correct error.
CNC Simulator Pro 2020 Free Download Latest Version
The main window of the CNC Simulator Pro 2020 Torrent comprises many options to enable you to start, control simulation playback. Users can also play, pause or stop the procedure, or can jump forward on a new step as well. The CNC Simulator Pro 2019 Free Download has many built-in code editor features. These features are the auto-completion, highlighting, line numbering and reformatting the code. This software allows the user the customizing the font style or color. The color or style may be of the code or the debugging window.
In conclusion, I just only say that CNC Simulator Pro 2020 Activation Key is the complete package. This package is used for the coding in the g-code. It is a very efficient program for programmers. It can help you to make the new code as well as editing the existing code saves in the program. The interface of the CNC Simulator 2019 is very easy and simple. Because it has two basic parts that are helping you with coding. One part is the coding part whiles the second one the result showing part. In the first place, you can easily be coding through the keyboard. On the other hand, the second plane shows the result of the code that you have to write in the first place.
Key Features:
- Students who have used this application are registered on CNC Server by the means of the Username and Password. Once you have log-in in a local network through any source. The instructor of that particular network can monitor, manage and tutor the students.
- The instructor can add or edit the exercises in the CNC server. Students can work on these exercises providing by the instructor. After completing the exercises, the student can transmit the answers to the instructor.
- CNC Server can save the student registration information in it. This will help the server to provide the work that is made by the student using this Server. And the student doesn’t have to work from the starting point.
- This application Server is included the test paper management, question library management, the examination paper automatic grading, as well as the test process management.
- Moreover, there are many other features are also in this software.
Cnc Simulator Pro Crack Serial Key
What’s New in the CNC Simulator 2020 Crack?
- Improvement is made in the interface of the software.
- Some bugs are fixed in the application.
- Some bugs are removed.
- New features are added in this version.
- New tools are also added in this version.
- There is an addition of some small updates in this software.
- Advancement in the interface of the software.
Cncsimulator Pro Platinum Edition Crack
System Requirements:
- Internet connection: Cable or DSL.
- Windows Operating System: Windows maybe the XP, Vista, 7, 8, 8.1, and 10 or later.
- A graphics card is also required for this application. It could of any size.
- If the software cannot run properly, kindly upgrade your computer.
- A wheel mouse is required for the zoom in and out.
- Microsoft .NET Framework 4.0 or later installed. If you didn’t have this, you can download it from the internet. The download link is providing in this software.
How to Crack this app?
Free Downloadable Cnc Machine Simulators
- Firstly, you have to download the CNC Simulator crack by clicking on the download link.
- The download link of this software is available at the bottom of this webpage of the website.
- After the complete downloading of the software’s crack, open the downloaded file setup.
- Therefore, After that, install the application by opening the software.
- After the complete installation, open the software.
- If you face any problem in it’s running, make sure that no other application is running in the background.
- We hope that you will use this software and enjoyed using all the amazing features.